Roller log debarker machine, also known as rotor-type log debarker machine or trough log debarker machine, the same equipment structure, but the name is different. Roller log debarker machine from the equipment structure is divided into: two-roll log debarker machine and single-roll log debarker machine. As the name suggests, single-roll log debarker machine only one wood stripping roller, two-roll log debarker machine has two rotors, so the work efficiency, Double-rotorer peeling machine is higher than the single-roll peeling machine. Here, we focus on two-roll log debarker machine.
Double-rotor log debarker machine with roller stripping, the structure is simple and strong, strong rigidity, low failure rate, long service life. It consists of stripping roller, feed port, the mouth of the mouth, the wooden mouth, power transmission device composed of five parts. Breaking the traditional drum-type log debarker machine, the material, the material should be the shortcomings of downtime. The veneer export and wood export separation, to achieve continuous work, from the feed → peeling → wood → re-feed → then peeled → and then the whole process of continuous wood, to achieve a flow of operations. Relative to different wood species, peeling effect can be adjusted, the length of different wood, bending spiral dry and wet can be different on the machine stripping. Stand-alone operation can peel 50-80 tons of logs a day, greatly saving manpower.
Double-rotor log debarker machine Features:
1, the use of open silos, from a feed, the other end of the assembly line of the operation, to overcome the existing drum-type peeling machine power outage, discharge, sub-mode of work shortcomings, high efficiency.
2, due to the impact of the teeth on the wood, not only to make the wood section in the chassis to do circular motion, and around their own rotation, so stripping high efficiency. On the eucalyptus, poplar and other difficult to peel the tree species have a good peeling effect, clarity of 95% or more.
3, the adaptability of wood, can be different tree species, diameter, length and shape of the wood segment peeling, due to the wooden section to do rotary motion and irregular beating, so the curved section of the concave section of the wood can also be fine with the teeth s contact. As a result, the stripping rate of curved logs is much higher than that of other drums.
4, because the huge chassis is fixed, so the energy consumption is small, the failure rate is low, the maintenance workload is small, the vibration and the noise is much lower than the roller peeling machine, the machine can produce the floor, even without the base to install, Easy to use.
Double-rotor log debarker machine use:
Suitable for the new cutting needle and part of the broad-leaved wood for peeling treatment, but also to complete part of the frozen material, dry material peeling treatment.
Previous:Single-rotor log debarker