Drum wood chipper is a special equipment for the preparation of various high quality wood chips, used in paper mills, particleboard mills, fiberboard factory wood production, export base. Can be logs, small diameter wood and other cutting into uniform length, uniform incision, the thickness of uniform high-quality industrial wood chips, but also cutting branches, plates and so on.
Drum-type chippers can cut logs, slabs, slabs, slag boards, bamboo, cotton poles and other non-wood fiber rods into certain specifications of the film, as at least particleboard, fibreboard, non-wood Pulp and paper of the basic raw materials. The machine structure is advanced, cutting sheet material quality is high, raw material adaptability, easy operation and maintenance. Machine by the base, knife roll, feeding roller up and down, conveyor belt, hydraulic system and other components.
The base is made of high-strength steel plate, which is the foundation of the whole machine. The knife is equipped with two flying knives, and the knife is fixed on the knife roll through the pressure block. The different thickness of the cutting material, the feeding roller assembly can be used in the hydraulic system in a certain range up and down the floating, cutting down the qualified material through the mesh sieve from the bottom of the row, the large pieces of paper will be in the machine and then cutting The
Hydraulic system: the oil from the hand pump to the fuel tank, you can start the shell, easy to replace the blade, in the maintenance of the time can be raised on the feed roller assembly, easy to adjust the knife, the knife at the end of the gap and comb the disassembly.
Disc wood chipper is a kind of wood chippers, it is used for the production of high quality wood chips for a special wood chippers. Disc wood chipper is a special equipment for the preparation of high quality wood chips. It is suitable for paper mills, particleboard mills, fiberboard mills and wood chips production bases. Can be logs, small diameter wood and other cutting into uniform length, uniform incision, the thickness of uniform high-quality industrial wood chips, but also cutting Ye material, sheet and so on.
Disc wood chipper by the rack, cutter, feed, cover, power distribution system and other components.
To meet the papermaking, fiberboard, particleboard industry on the length of the different requirements of wood chips, chip length can be adjusted within a certain range.
Disc wood chippers, compact structure and reasonable, easy to operate, large production capacity, wood chips qualified rate, low energy consumption per unit of wood production, is the ideal production of high quality wood chips.
Disc wood chippers using low-pressure or high-voltage motor, large disc-type wood chipper with pulley drive and direct drive two; feed level and tilt in two ways, the material is also on the material and the next material Two ways. Disc wood chippers are produced at 2 to 160 cubic meters per hour.
Next:Disc Wood Chipper